hetzner使用proxmox或者solusvm开Nat kvm独立ipv6桥接网卡设置

by 我是只肥兔子

EQblog / 2018-10-04 13:16

结果谷歌一系列的查找资料,最后还是到了hetzner的wiki找到了解决办法。

1.proxmox桥接网卡配置:

# /etc/network/interfaces  ### Hetzner Online GmbH - installimage  # Loopback device:  auto lo  iface lo inet loopback  #  # device: eth0  auto  eth0  iface eth0 inet static         address   <Main IP>         netmask   255.255.255.255         pointopoint   <Gateway>         gateway   <Gateway>  #  iface eth0 inet6 static         address   <Address from the IPv6 Subnet> #eg: 2001:db8::2         netmask   128         gateway   fe80::1         up sysctl -p  # for single IPs  auto vmbr0  iface vmbr0 inet static          address  10.0.1.1          netmask  255.255.255.0          bridge_ports none          bridge_stp off          bridge_fd 0  #  iface vmbr0 inet6 static         address   <Address from the IPv6 Subnet> #eg: 2001:db8::2         netmask   64

关于Nat链接网络请使用iptables实现。

2.solusvm下网卡配置:

主网卡中默认配置请不要修改,仅需将IPV6ADDR的/64换为/128
例如:IPV6ADDR= 2001:db8::2/128
然后将桥接网卡更改为:

DEVICE=br0  ONBOOT=yes  TYPE=Bridge  BOOTPROTO=static  IPADDR=10.0.1.1  NETMASK=255.255.255.0  IPV6ADDR=2001:db8::2/64

关于联网与端口映射请使用iptables

3.关于虚拟机(kvm)的配置:

这里拿2001:db8::此ipv6做示范
Debian or Ubuntu:

iface eth0 inet6 static         address    2001:db8::f001         netmask   64         gateway   2001:db8::2

Centos:

IPV6INIT=yes  IPV6ADDR=2001:db8::f001/64  IPV6_DEFAULTGW=2001:db8::2

Shared via Inoreader