Practical SSH examples to take your remote system admin game to the next level. Commands and tips to not only use
SSH but master ways to move around the network.
Knowing a few
ssh tricks will benefit any system administrator, network engineer or security professional.
Practical SSH examples
First The Basics
Breaking down the SSH Command Line
ssh example command uses common parameters often seen when connecting to a remote
localhost:~$ ssh -v -p 22 -C neo@remoteserver
-v : Print debug information, particularly helpful when debugging an authentication problem. Can be used multiple times to print additional information.
-p 22 : Specify which port to connect to on the remote SSH server. 22 is not required as this is the default, but if any other port is listening connect to it using the
-p parameter. The listening port is configured in the
sshd_config file using the
Port 2222 format.
-C : Compression is enabled on the connection using this parameter. If you are using the terminal over a slow link or viewing lots of text this can speed up the connection as it will compress the data transferred on the fly.
neo@ : The string before the @ symbol denotes the username to authenticate with against the remote server. Leaving out the user@ will default to using the username of the account you are currently logged in to (~$ whoami). User can also be specified with the
remoteserver : The hostname that the
ssh is connecting to, this can be a fully qualified domain name, an IP address or any host in your local machines hosts file. To connect to a host that resolves to both IPv4 and IPv6 you can specify add a parameter
-6 to the command line so it resolves correctly.
Each of the above a parameters are optional apart from the remoteserver.
Using a Configuration File
While many users are familiar with the
sshd_config file, there is also a client configuration file for the
ssh command. This defaults to
~/.ssh/config but can also be specified as a parameter with the
Host * Port 2222 Host remoteserver HostName remoteserver.thematrix.io User neo Port 2112 IdentityFile /home/test/.ssh/remoteserver.private_key
In the above example ssh configuration file you can see that there are two Host entries. The first is a wildcard denoting all hosts have the Port 2222 configuration option applied. The second says for a hostname of remoteserver as seen on the ssh command line – use a different username, port, FQDN and IdentityFile.
The configuration file can save a lot of typing by including advanced configuration shortcuts any time a connection is made to particular hosts.
Copy Files over SSH with SCP
ssh client comes with two other very handy tools for moving files around over an encrypted ssh connection. The commands are
sftp, see the examples below for basic usage. Note that many parameters for the
ssh can be applied to these commands also.
localhost:~$ scp mypic.png neo@remoteserver:/media/data/mypic_2.png
In this example the file mypic.png was copied to the remoteserver to file system location /media/data and was renamed to mypic_2.png.
Don’t forget the difference in the port parameter. This is a gotcha that hits everyone using
scp on the command line. The port parameter is
-p as it is in the
ssh client.!. You will forget, but don’t worry everyone does.
For those familiar with command line
ftp, many of the commands are similar when using
sftp. You can push, put and ls to your hearts desire.
In many of these examples we could achieve the result using a number of methods. As in all our tutorials and example command sheets, the focus is practical examples that simply get the job done.
1. Proxy Traffic over SSH using SOCKS
The SSH Proxy feature has been placed at number 1 for good reason. It is more powerful than many users realise giving you access to any system that the remote server can reach, using almost any application. The
ssh client can tunnel traffic over the connection using a SOCKS proxy server with a quick one liner. A key thing to understand is that traffic to the remote systems will have a source of the remote server. For example in a web server log file.
localhost:~$ ssh -D 8888 user@remoteserver localhost:~$ netstat -pan | grep 8888 tcp 0 0 127.0.0.1:8888 0.0.0.0:* LISTEN 23880/ssh
Here we start the socks proxy server running on TCP port 8888, the second command checks that the port is now listening. The
127.0.0.1 indicates the service is running on localhost only. We can use a slightly different command to listen on all interfaces including ethernet or wifi, this will allow other applications (browsers or other) on our network to connect to the ssh socks proxy service.
localhost:~$ ssh -D 0.0.0.0:8888 user@remoteserver
Now we can configure our browser to connect to the socks proxy. In Firefox select preferences | general | network settings. Add the IP address and the port for the browser to connect to.
Note the option at the bottom of the form to force browser DNS requests to also go over the socks proxy. If you are using the proxy to encrypt your web traffic on the local network you will definitely want to select this option so the DNS requests are also tunnelled over the SSH connection.
Enable Socks Proxy on Chrome
Using a command line parameter when launching Chrome will use the socks proxy and also tunnel DNS requests from the browser over the socks5 proxy. Trust but verify, use tcpdump (tcpdump not port 22) to confirm the DNS requests are no longer visible.
localhost:~$ google-chrome --proxy-server="socks5://192.168.1.10:8888"
Using other applications with the Proxy
Keep in mind that there are many other applications that can utilise a socks proxy. A web browser is simply the most popular. Some applications will have configuration options for use of the proxy. Others may need some help by using a helper program that talks the socks protocol. An example of this is proxychains. Using this tool we can for example use Microsoft RDP over the socks proxy.
localhost:~$ proxychains rdesktop $RemoteWindowsServer
The configuration options for the socks proxy are set in the proxychains configuration file.
rdesktopwith much smoother interaction.
Use Case for the SSH Socks Proxy
You are in a cafe or hotel having to use the somewhat sketchy WIFI. From our Laptop we run the
ssh proxy locally and establish an
ssh tunnel into our home network using a our local Rasberry Pi. Using the browser or other applications configured for the SOCKS proxy we can access any network services on our home network or browse to the Internet via our Home Network Connection. Everything between our Laptop and the Home Server (across the WIFI and Internet to home) is encrypted in the SSH tunnel.
2. SSH Tunnel (port forward)
In its simplest form an SSH tunnel simply opens a port on your local system that connects through to another port at the other end of the tunnel.
localhost:~$ ssh -L 9999:127.0.0.1:80 user@remoteserver
Lets break down the -L parameter. Think of -L as the Local listening side. So in our example above the port 9999 is listening on localhost and port forwards through to port 80 on remoteserver, note that the 127.0.0.1 refers to localhost on the remote server!
Lets take it up a notch. In this following example the port that is listening can be connected to from other hosts on the local network.
localhost:~$ ssh -L 0.0.0.0:9999:127.0.0.1:80 user@remoteserver
In these examples the port we are connecting is a listening web server. It could also be a proxy server or any other TCP service.
3. SSH Tunnel Forward to Secondary Remote host
We can use the same options seen above to have the tunnel connect to another service running on a secondary system from the remote server.
localhost:~$ ssh -L 0.0.0.0:9999:10.10.10.10:80 user@remoteserver
In this example we are forwarding the tunnel from remoteserver to the web server running on 10.10.10.10. The traffic from remoteserver -> 10.10.10.10 is no longer within the ssh tunnel. The web server on 10.10.10.10 will see remoteserver as the source of the web requests.
4. SSH Reverse Tunnel
In this scenario we want to setup a listening port on the remote server that will connect back to a local port on our localhost (or other system).
localhost:~$ ssh -v -R 0.0.0.0:1999:127.0.0.1:902 192.168.1.100 user@remoteserver
With this ssh session established a connection to the remoteserver port 1999 will be forwarded to port 902 on our local client.
5. SSH Reverse Proxy
In this case we are establishing a SOCKS proxy with our ssh connection, however the proxy is listening at the remote server end. With connections to that remote socks proxy now emerging from the tunnel as traffic originating from our localhost.
localhost:~$ ssh -v -R 0.0.0.0:1999 192.168.1.100 user@remoteserver
Troubleshooting Remote SSH Tunnels
If you are having trouble getting the remote SSH options to work, check with
netstat which interface the listening port is attached too. Even though we have specified 0.0.0.0 in the above examples, if GatewayPorts is set to no in the sshd_config then the listener will only bind to localhost (127.0.0.1).
Note that when you are opening tunnels and socks proxies you may be exposing internal network resources to untrusted networks (like the Internet!). This can be a serious security risk so ensure you understand what is listening and what it has access too.
6. Establish a VPN over SSH
A common term amongst offensive security folks (pentesters / red teams / etc), is to pivot into a network. Once you have a connection established on one system that system becomes a gateway point for further access to the network. This is known as pivoting and enables lateral movement through the network.
We can use the SSH proxy for this and proxychains, however there are some limitations. For example we cannot use raw sockets, so Nmap
SYN scans cannot be used to port scan the Internal network.
Using this more advanced VPN option we move the connectivity down to layer 3. We can then simply route traffic through the tunnel using standard network routing.
This technique uses
tun interfaces and routing.
First we need these options set in the
sshd_config. Since we are making interface changes on the remote system and the client system, we will need root privileges on both sides.
PermitRootLogin yes PermitTunnel yes
Then we will establish our
ssh connection using the parameter that requests
tun devices be initialised.
localhost:~# ssh -v -w any root@remoteserver
Now you should have a
tun device when you show interfaces (
# ip a). Next step is to add IP addresses to the tunnel interfaces.
SSH Client Side:
localhost:~# ip addr add 10.10.10.2/32 peer 10.10.10.10 dev tun0 localhost:~# ip tun0 up
SSH Server Side:
remoteserver:~# ip addr add 10.10.10.10/32 peer 10.10.10.2 dev tun0 remoteserver:~# ip tun0 up
Now we should have a direct route to the other host (
route -n and
It is now possible to route any subnet through the other side host.
localhost:~# route add -net 10.10.10.0 netmask 255.255.255.0 dev tun0
On the remote side we need to enable
remoteserver:~# echo 1 > /proc/sys/net/ipv4/ip_forward remoteserver:~# iptables -t nat -A POSTROUTING -s 10.10.10.2 -o enp7s0 -j MASQUERADE
Boom! Layer three VPN through an SSH tunnel. Now that’s winning.
Any trouble, try tcpdump and
ping to see where its broken. Since we are playing at layer 3 our
icmp packets should be jumping through that tunnel.
7. Copy your SSH key (ssh-copy-id)
There are multiple ways to achieve this however this command is a shortcut that saves time. What does it actually do? Well this command simply replicates what you can also do manually. Copying the
~/.ssh/id_rsa.pub (or the default) key from your system and adds it to an
~/.ssh/authorized_keys file on the remote server.
localhost:~$ ssh-copy-id user@remoteserver
8. Run Command Remotely (non-interactive)
ssh command can be chained to other commands for the usual piping fun. Simply add the command you want to run on the remote host as a final parameter in quotes.
localhost:~$ ssh remoteserver "cat /var/log/nginx/access.log" | grep badstuff.php
In this example the
grep is being performed on the local system after the log file has been pushed across the
ssh session. If the file is large it would be more efficient to run the
grep on the remote side simply by enclosing the pipe and
grep in the double quotes.
Another example performs the same function as the
ssh-copy-id short cut in Tip 7.
localhost:~$ cat ~/.ssh/id_rsa.pub | ssh remoteserver 'cat >> .ssh/authorized_keys'
9. Remote Packet Capture & View in Wireshark
I grabbed this one from our tcpdump examples. Use it for a remote packet capture with the results feeding directly into your local Wireshark GUI.
:~$ ssh root@remoteserver 'tcpdump -c 1000 -nn -w - not port 22' | wireshark -k -i -
10. SSH Copy Folder from Local to Remote
A neat trick that compresses a folder using
bzip2 (that’s the -j in the
tar command), then extracts the
bzip2 stream on the other side creating a duplicate of the folder on the remote server.
localhost:~$ tar -cvj /datafolder | ssh remoteserver "tar -xj -C /datafolder"
11. Remote GUI Applications with SSH x11 Forwarding
If the client and remote server both have X installed. It is possible to run a GUI command remotely, with the Window appearing on your local desktop. This feature has been around since the beginning of time, but can still be very useful. Run a remote web browser or even the VMWawre Workstation console as I do in this example.
localhost:~$ ssh -X remoteserver vmware
X11Forwarding yes in the
12. Copy files remotely with rsync and SSH
rsync has many advantages over
scp, if periodically need to backup a directory, large numbers of files or very large files it should be used. It has the ability to recover from failed transfers and only copy differences between two locations saving bandwidth and time.
The example here uses
gzip compression (-z) and archive mode (-a) that includes recursive copy.
:~$ rsync -az /home/testuser/data remoteserver:backup/
13. SSH over Tor Network
The anonymised Tor Network can tunnel SSH traffic by using the
torsocks command. The following command will proxy the
ssh connection through the Tor network.
localhost:~$ torsocks ssh myuntracableuser@remoteserver
Torsocks will use the localhost port 9050 to proxy traffic. As always when using
tor serious consideration must be taken to understand what traffic is being tunnelled and other operational security (opsec) concerns. Where are your DNS requests going?
14. SSH to EC2 instance
When using SSH to connect to your EC2 instance within Amazon you will need to use a private key. Download the key (extension .pem) from your Amazon EC2 control panel and change the permissions (
chmod 400 my-ec2-ssh-key.pem. Keep this key somewhere safe or put it in your
localhost:~$ ssh -i ~/.ssh/my-ec2-key.pem ubuntu@my-ec2-public
The -i parameter simply tells the
ssh client to use this key. This would be an ideal example of where to use the
~/.ssh/config to configure the use of the key automatically when connecting to the ec2 host.
Host my-ec2-public Hostname ec2???.compute-1.amazonaws.com User ubuntu IdentityFile ~/.ssh/my-ec2-key.pem
15. Edit text files with VIM over ssh/scp
For all those
vim users out there, this one can save some time. Using
vim we can edit files over
scp with one command. Using this method simply creates a file in
/tmp on the local system and then copies it back once we write the file in
Note the format is slightly different to regular
scp. After the host we have a double
//. This references the absolute path. A single slash will have a path that is relative to the users home directory.
**warning** (netrw) cannot determine method (format: protocol://[user@]hostname[:port]/[path])
If you see this error, double check the format of your command. It usually means there is a syntax error.
16. Mount remote SSH location as local folder with SSHFS
sshfs – an
ssh filesystem client, we can mount a local directory to a remote location with all file interaction taking place over the encrypted
localhost:~$ apt install sshfs
On Ubuntu and Debian based system we install the
sshfs package and then simply mount the remote location.
localhost:~$ sshfs user@remoteserver:/media/data ~/data/
17. SSH Multiplex using ControlPath
By default when you have an existing connection to a remote server with
ssh, a second connection using
scp will establish a new session with the overhead of authentication. Using the
ControlPath options we can have the existing session be used for all subsequent connections. This will speed things up significantly. It is noticeable even on a local network but even more so when connecting to remote resources.
Host remoteserver HostName remoteserver.example.org ControlMaster auto ControlPath ~/.ssh/control/%r@%h:%p ControlPersist 10m
ControlPath denotes a socket that is checked by new connections to see if there is an existing
ssh session that can be used. The ControlPersist option above means even after you exit the terminal, the existing session will remain open for 10 minutes, so if you were to reconnect within that time you would use that existing socket. See the
man page for more information.
18. Stream Video over SSH using VLC + SFTP
Long time users of
vlc (Video Lan Client) are not always of aware of this handy option for when you simply need to watch video over the network. Using the
vlc option to File | Open Network Stream one can simply enter the location as a an
sftp:// location. A prompt will appear for authentication details if password is required.
19. Two Factor Authentication
Most readers will understand the value in using Two Factor Authentication, the same benefits that apply to your banking or Google Account can be applied to your SSH service.
ssh comes with a form of Two Factor capability included, that being a passphrase and an SSH key. An advantage of using a hardware based token or the Google Authenticator App is the fact that they are generally coming from a second physical device.
See our 8 minute guide to getting started with Google Authenticator and SSH.
20. Bouncing through jump hosts with ssh and -J
When network segmentation means you are jumping through multiple
ssh hosts to get to a final destination network or host, this jump host shortcut might be just what you need.
localhost:~$ ssh -J host1,host2,host3 firstname.lastname@example.org
A key thing to understand here is that this is not the same as
ssh host1 then
user@host1:~$ ssh host2, the
-J jump parameter uses forwarding trickery so that the localhost is establishing the session with the next host in the chain. So our localhost is authenticating with host4 in the above example; meaning our localhost keys are used and the session from localhost to host4 is encrypted end to end.
To use this ability in the
ssh_config use the ProxyJump configuration option. If you regularly have to jump through multiple hosts; use the config file and your alias to
host4 will save you a lot of time.
21. Block SSH Brute Force Attempts with iptables
Anyone who has managed an SSH service on the Internet, and viewed the logs will be aware of the amount of SSH brute force attempts that take place every hour of every day. An immediate way to reduce the noise in your logs is to move SSH to a port other than 22. Make the change in the
sshd_config file using the Port ## configuration option.
iptables we can also simply block attempts to connect to the port from sources that reach a certain threshold. A simple way to do this is to use OSSEC, as this not only blocks SSH but will also perform a bunch of other host based intrusion detection functions (HIDS).
22. Modify Port Forwarding within a session with ~C
And our final
ssh example is for modifying port forwarding on the fly within an existing
ssh session. Picture this example scenario. You are deep in a network; perhaps you have jumped through half a dozen jump hosts and need a local port on your workstation forwarded to Microsoft SMB on the old Windows 2003 system you spotted (ms08-67 anyone?).
enter try typing
~C in your terminal. This a control escape sequence within the session that allows to make changes to the existing connection.
localhost:~$ ~C ssh> -h Commands: -L[bind_address:]port:host:hostport Request local forward -R[bind_address:]port:host:hostport Request remote forward -D[bind_address:]port Request dynamic forward -KL[bind_address:]port Cancel local forward -KR[bind_address:]port Cancel remote forward -KD[bind_address:]port Cancel dynamic forward ssh> -L 1445:remote-win2k3:445 Forwarding port.
You can see here we have forwarded our local port 1445 to the Windows 2003 host we found on the internal network. Now simply launch
msfconsole and we are good to go (assuming you were planning on exploiting that host).
ssh examples, tips and commands are intended to give you a starting point; additional detail on each of the commands and capabilities is available using the
man pages (
Being able to reach out and run commands on systems anywhere in the world has always fascinated me. By developing your skills with tools such as
ssh you will become more productive and effective at whatever game you play.
Thanks for reading and if you have any comments or suggestions please drop me a note using the contact form. Have fun!