Megacli show rebuild status

1) show all disks parameters:

# MegaCli64 -PDList -aALL  

looking for these parameters:

Enclosure Device ID: 245 Slot Number: 15 and

Firmware state: Rebuild
2) check particular disk:

# MegaCli64 -PDRbld -ShowProg -physdrv[245:11] -aALL  

for disable beeps:

# /opt/MegaRAID/MegaCli/MegaCli64 -AdpSetProp AlarmSilence -a0  

3) Find HDD

# MegaCli64 -PdLocate -start -physdrv\[245:13\]  -aALL  

4) Mark offline

# MegaCli64 -PdOffline -physdrv\[245:13\]  -aALL  

5) Mark Missing

# MegaCli64 -PdMarkMissing -physdrv\[245:13\]  -aALL  

6) Read HDD params

# MegaCli64 -CfgDsply -a0 | less  

Looking for Span Reference: 0x00 and Physical Disk: 13

replace HDD

MegaCli64 -PdReplaceMissing -physdrv\[245:13\] -array0 -row13 -a0  

start rebuild

MegaCli64 -PDRbld -start -physdrv[245:13] -aALL